3.Printer-specific Adjustments
3.4
To Adjust Colors
Explanation
To adjust the color reproducibility of printouts, change the settings of the printer driver or perform various
image quality adjustments.
Procedures
Refer to the procedure corresponding to the user's particular request.
3.4.1
To Adjust Color Balance and Density
Before adjustment
After adjustment
The desired color balance is obtained.
The natural color balance is obtained.
(Ex. Yellowness is enhanced.)
Explanation
If you would like to change the color balance or darkness of the printouts and reproducibility of low/
middle density in accordance with a type of original or the user's requirements, change the "color
balance" option on the printer driver.
Procedures
(1) Perform color balance adjustment.
For details of the adjustment procedure, refer to "3.1.5 Color Balance Adjustment".
Caution after the adjustment
Nothing in particular
© 2018 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
3-43