Toshiba e-STUDIO2010AC Imaging Manual page 315

• The adjustment may possibly diminish the image quality, as shown by the table below. Therefore,
carefully perform the adjustment, while checking the scanned-in image.
Procedures used
Any of procedures from (1) to (4) The photo image area may be blurred.
(1) or (3)
(1) or (3)
(4)
 Remarks
• Use the following steps to change the default resolution, original mode, compression rate and/or
background adjustment options:
(a) Press [User Functions -User-] on [Home] screen to enter the "User Functions" menu.
(b) Press [Scan].
(c) Press the Next button several times to display the screen to change the default value in the
desired Color mode.
(d) In the "Resolution", "Original Mode", "Compress" and/or "Background Adjustment" option, press
the desired button to change the default.
• The default resolution can be selected on a color mode basis: Full color mode (including the Auto
Color mode), Gray scale mode and Black mode
• The following resolution options are available as the default:
Full color mode (including Auto Color mode): 600 / 400 / 300 / 200 / 150 / 100 (dpi)
Gray scale mode: 600 / 400 / 300 / 200 / 150 / 100 (dpi)
Black mode: 600 / 400 / 300 / 200 / 150 / 100 (dpi)
• Remember that when scanning the original in the Full color mode, if the original mode option is
switched from the "Text/Photo" mode or the "Photo" to the "Text" mode, the file size may become
larger.
© 2018 TOSHIBA TEC CORPORATION All rights reserved
Possible image degradation
Noise may be increase around text.
Small-sized text may become illegible.
Light-colored images may not be clearly scanned.
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
5-9
5.Scanning-specific Adjustments