Toshiba e-STUDIO2010AC Imaging Manual page 181

For Mac
Mac
Open the print dialog box. Enable the "Print Mode" - "Distinguish Thin Line" option.
After changing the setting on the printer driver menu, print the image and check its image quality.
You can make thin lines thicker at the following codes when the "Distinguish Thin Line" checkbox is
selected.
Resolution Color mode
Common for Color
600 dpi
and Black
Common for Color
1200 dpi
and Black
• The unit of the setting value is the number of dots (line thickness). Lines thinner than the setting value
will become thicker as specified.
• Set the value while checking the print image until the optimum value is obtained.
 Caution after the adjustment
Nothing in particular
© 2018 TOSHIBA TEC CORPORATION All rights reserved
Recommended
[05] Code
value
Set a value larger
8240
than 2.
Set a value larger
8241
than 2.
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
3-21
3.Printer-specific Adjustments
Acceptable
Default
value range
1 to 9 2
1 to 9 2