To Eliminate Shading Around Scanned Images - Toshiba e-STUDIO2010AC Imaging Manual

5.Scanning-specific Adjustments
5.9

To Eliminate Shading around Scanned Images

 Explanation
The white void amount around the scanned image is adjusted. Since the void amount is very small in the
stored image in scanning, shading may appear around the scanned image due to a slight difference of
the original size. This can be eliminated by adjusting the setting value.
• The setting value is applied to all resolutions and color modes.
 Procedures
All the steps in the adjustment procedure shall be performed by the service technician.
(1) Select [05 ADJUSTMENT MODE]. Change the value for the code [7489] to [7491] to adjust the
white void amount around the scanned image.
Original size
[Auto]
[Registered Size]
[Auto Detected]
• When the value is increased, the white void amount all around the scanned image is made wider
by the setting value range.
 Caution after the adjustment
Nothing in particular.
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
Setting value
[05] Code
reference
05-7489
05-7490
Equivalent to 24 by 1
mm
05-7491
5-22
Acceptable
value range
0 to 255
© 2018 TOSHIBA TEC CORPORATION All rights reserved
Default
0