Toshiba e-STUDIO2010AC Imaging Manual page 49

Move the frame [2] to the right
Front side
Rear side
The writing start position on the front side is
moved to the leading edge side.
e-STUDIO2515AC/3015AC/3515AC/4515AC/5015AC
Procedure
Tilt the laser optical unit (LSU).
Explanation of the portions used for adjustment
[1] LSU holder
[2] Frame
[3] The screw hole to use when adjusting the titled volume
[4] The scale to use when adjusting the tilted volume (LSU holder side)
[5] The scale to use when adjusting the tilted volume (frame side)
[6] The screw hole to use when the value of "A-B" is +0.5 mm ("+0.5" is marked)
[7] The screw hole to use when the value of "A-B" is -0.5 mm ("-0.5" is marked)
© 2018 TOSHIBA TEC CORPORATION All rights reserved
1.General Adjustments – Copying, Printing and e-Filing (Output from Box)
Move the frame [2] to the left
Front side
Rear side
The writing start position on the front side is
moved to the trailing edge side.
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
1-37
Before
adjustment
After
adjustment