3Com Switch 8800 Configuration Guide
8.4 Configuring Protocol-Based VLAN
The following sections describe the protocol-based VLAN configuration tasks:
Creating/Deleting a VLAN Protocol Type
Associating/Dissociating a Port with/from a Protocol-Based VLAN
8.4.1 Creating/Deleting a VLAN Protocol Type
You can use the following commands to create/delete a VLAN protocol type.
Perform the following configuration in VLAN view.
Table 8-6 Create/Delete a VLAN protocol type
Create a VLAN protocol type
Delete an existing VLAN protocol type
8.4.2 Associating/Dissociating a Port with/from a Protocol-Based VLAN
Perform the following configuration in Ethernet port view.
Table 8-7 Associate/Dissociate a port with/from a protocol-based VLAN
Associate a port with a protocol-based
VLAN
Remove a port from a protocol-based
VLAN
Operation
Operation
8-4
Chapter 8 VLAN Configuration
Command
protocol-vlan protocol { ip ip_address
[ net_mask ] | mode { ethernetii etype
etype_id
| llc dsap dsap_id ssap
ssap_id | snap etype etype_id } }
undo
protocol-vlan
{ protocol_index [ to protocol_end ] | all }
Command
port hybrid protocol-vlan vlan vlan-id
{ vlan-protocol_list | all }
undo port hybrid protocol-vlan vlan
vlan-id { vlan-protocol_list | all }
protocol