Configure The Ip Address Of Domain Name Server; Configure Domain Name Suffix - 3Com 8800 Configuration Manual

3Com Switch 8800 Configuration Guide
this function when you do not want to perform dynamic domain name resolution
sometimes.
Perform the following configuration in system view.
Table 14-2 Enable/disable dynamic domain name resolution
Enable dynamic domain name resolution
Disable dynamic domain name resolution
By default, dynamic domain name resolution is disabled.

14.3.2 Configure the IP Address of Domain Name Server

You are required to configure the domain name sever if you need to use the function of
the dynamic domain name resolution. In this way, you can send the inquiry request
packets to the appropriate sever. The system supports up to six domain name severs.
Perform the following configuration in system view.
Table 14-3 Configure the IP address of the domain name sever
Configure the IP address of the domain
name sever
Delete the IP address of the domain
name sever

14.3.3 Configure Domain Name Suffix

You can use the following command to configure domain name suffix list. By
configuring this, you can just input part of the domain name and the system
automatically adds the preconfigured suffix to perform the resolution. The system
supports up to 10 domain name suffixes.
Perform the following configuration in system view.
Table 14-4 Configure domain name suffix
Configure domain name suffix
Delete domain name suffix
Operation
Operation
Operation
14-3
Chapter 14 DNS Configuration
Command
dns resolve
undo dns resolve
Command
dns server ip-address
undo dns server [ ip-address ]
Command
dns domain domain-name
undo dns domain [ domain-name ]