3Com 8800 Configuration Manual page 417

3Com Switch 8800 Configuration Guide
Delete a sub-rule (basic ACL
view)
Delete an ACL or all ACLs
(system view)
Enter advanced ACL view from
system view
Define
ACL view)
Delete a sub-rule(advanced
ACL view )
Delete an ACL or all ACLs
(system view)
You can define multiple rules for an ACL by using the rule command several times.
34.2.2 Importing ACL
You can import a defined ACL in user interface view to achieve ACL control.
Perform the following configurations respectively in system view and user interface
view.
Table 34-2 Import ACL
Enter user interface view (system view)
Import the ACL (user interface view)
See the Command Manual for details about these commands.
Note:
Currently the ACL control function of TELNET user can reference to the number-based
ACLs and advanced ACLs.
Operation
sub-rule( advanced
Operation
Chapter 34 Logon User ACL Control Configuration
Command
undo rule rule-id [ source ] [ fragment ]
[ time-range ]
undo acl { number acl-number | name acl-name
| all }
acl { number acl-number | name acl-name
advanced } [ match-order { config | auto } ]
rule [ rule-id ] { permit | deny } protocol [ source
{ source-addr wildcard | any } ] [ destination
{ dest-addr wildcard | any } ] [ source-port
operator port1 [ port2 ] ] [ destination-port
operator port1 [ port2 ] ] [ icmp-type type code ]
[ established ] [ [ precedence precedence | tos
tos ]* | dscp dscp ] [ fragment ] [ time-range
name ] [ vpn-instance instance-name ]
undo rule rule-id [ source | destination |
source-port | destination-port | icmp-type |
precedence | tos | dscp | fragment | time-range
| vpn-instance ]*
undo acl { number acl-number | name acl-name
| all }
user-interface [ type ] first-number
acl acl-number { inbound | outbound }
34-2
Command