3Com 8800 Configuration Manual page 122

3Com Switch 8800 Configuration Guide
Table 13-19 Configure NetBIOS server address for a global DHCP address pool
Configure one or more NetBIOS server
addresses for a global DHCP address pool
Remove one or all NetBIOS server addresses
configured for a global DHCP address pool
II. Configuring NetBIOS server address for current VLAN interface
Perform the following configuration in VLAN interface view.
Table 13-20 Configure NetBIOS server address for current VLAN interface
Configure one or more NetBIOS server
addresses for the DHCP address pool of
current VLAN interface
Remove
addresses configured for the DHCP address
pool of the current VLAN interface
III. Configuring NetBIOS server address for multiple VLAN interfaces
Perform the following configuration in system view.
Table 13-21 Configure NetBIOS server address for multiple VLAN interfaces
Configure one or more NetBIOS server
addresses for the DHCP address pools
of multiple VLAN interfaces
Remove one or all NetBIOS server
addresses configured for the DHCP
address
interfaces
By default, no NetBIOS server address is configured for global and VLAN interface
address pools.
If you execute the dhcp server nbns-list command multiple times, the newly
configured IP addresses overwrite the existing ones.
Operation
Operation
one or all NetBIOS
Operation
pools of multiple
13-14
Chapter 13 DHCP Configuration
nbns-list ip-address [ ip-address ]
undo nbns-list { ip-address | all }
dhcp server nbns-list ip-address
[ ip-address ]
server
undo dhcp
{ ip-address | all }
dhcp server
[ ip-address ] { interface vlan-interface
vlan_id [ to vlan-interface vlan_id ] |
all }
undo dhcp
{ ip-address
VLAN vlan-interface
vlan-interface vlan_id ] | all }
Command
Command
server nbns-list
Command
nbns-list ip-address
server nbns-list
| all } { interface
vlan_id [ to