3Com 8800 Configuration Manual page 153

3Com Switch 8800 Configuration Guide
II. Network diagram
1.1.1. 2/24 1.1.1. 2/24
A A
Host 1. 1.1. 1 Host 1. 1.1. 1
Figure 17-1 Network diagram for the static route configuration example
III. Configuration procedure
Configure the static route for Switch A
[Switch A] ip route-static 1.1.3.0 255.255.255.0 1.1.2.2
[Switch A] ip route-static 1.1.4.0 255.255.255.0 1.1.2.2
[Switch A] ip route-static 1.1.5.0 255.255.255.0 1.1.2.2
Configure the static route for Switch B
[Switch B] ip route-static 1.1.2.0 255.255.255.0 1.1.3.1
[Switch B] ip route-static 1.1.5.0 255.255.255.0 1.1.3.1
[Switch B] ip route-static 1.1.1.0 255.255.255.0 1.1.3.1
Configure the static route for Switch C
[Switch C] ip route-static 1.1.1.0 255.255.255.0 1.1.2.1
[Switch C] ip route-static 1.1.4.0 255.255.255.0 1.1.3.2
Configure the default gateway of the Host A to be 1.1.1.2
Configure the default gateway of the Host B to be 1.1.4.1
Configure the default gateway of the Host C to be 1.1.5.2
Then, all the hosts or switches in the figure can be interconnected in pairs.
Host 1. 1.5. 1 Host 1. 1.5. 1
C C
1.1.5. 2/24 1.1.5. 2/24
1.1.2. 2/24 1.1.2. 2/24 1.1.3. 1/24 1.1.3. 1/24
Switch C Switch C
1.1.2. 1/2 4 1.1.2. 1/2 4
Switch A Switch A
Chapter 17 Static Route Configuration
1.1.3. 2/2 4 1.1.3. 2/2 4
1.1.4. 1/2 4 1.1.4. 1/2 4
Switch B Switch B
B B
Host 1. 1.4. 2 Host 1. 1.4. 2
17-5