3Com 8800 Configuration Manual page 619

3Com Switch 8800 Configuration Guide
II. Network Topology
telnet user
Figure 40-4 Network diagram for the remote RADIUS authentication of Telnet users
III. Configuration procedure
Add a Telnet user.
Omitted
Note:
For details about configuring FTP and Telnet users, refer to User Interface
Configuration of Getting Started Operation in this manual.
Configure remote authentication mode for the Telnet user, i.e. scheme mode.
[SW8800-ui-vty0-4] authentication-mode scheme
Configure domain.
[SW8800] domain cams
[SW8800-isp-cams] quit
Configure RADIUS scheme.
[SW8800] radius scheme cams
[SW8800-radius-cams] primary authentication 10.110.91.146 1812
[SW8800-radius-cams] key authentication expert
[SW8800-radius-cams] server-type 3Com
[SW8800-radius-cams] user-name-format without-domain
Associate the domain with RADIUS.
[SW8800-radius-cams] quit
[SW8800] domain cams
[SW8800-isp-cams] radius-scheme cams
Chapter 40 AAA and RADIUS/TACACS+ Protocol Con
Authentication Servers
( IP address:10.110.91.164 )
Switch
40-32
Internet Internet
figuration