Msdp Integrated Networking - 3Com 8800 Configuration Manual

3Com Switch 8800 Configuration Guide
[SwitchA-ospf-1] quit
Configure Switch B as its MSDP peer.
[SwitchA] msdp
[SwitchA-msdp] peer 10.10.1.1 connect-interface loopback 0
Configure Originating RP.
[SwitchA-msdp] originating-rp loopback0
[SwitchA-msdp] quit
Configure C-RP and BSR.
[SwitchA] pim
[SwitchA-pim] c-rp loopback 10
[SwitchA-pim] c-bsr loopback 10 30

30.4.3 MSDP Integrated Networking

I. Networking requirement
In the following network, enable MSDP and configure an Anycast RP in PIM-SM
domain 1; establish MSDP peer relationship among RPs across PIM-SM domains; and
use MBGP between domains. For the related commands, refer to "Multicast Protocol
Configuration".
Chapter 30 MSDP Configuration
30-18