3Com 8800 Configuration Manual page 470

3Com Switch 8800 Configuration Guide
II. Displaying IP routing table associated with vpn-instance
After the above configuration, you can execute display command in any view to
display the corresponding information in the IP routing tables related to vpn-instance,
and to verify the effect of the configuration.
Table 37-35 Display IP routing table associated with vpn-instance
Display
associated with vpn-instance
III. Displaying vpn-instance related information
After the above configuration, executing the display command in any view can display
the vpn-instance related information, including its RD, description, the interfaces
associated with it, and so on. You can view the information to verify the configuration
effect.
Table 37-36 Display vpn-instance related information
Display
information, including its RD, description,
the interfaces associated with it, and so on.
IV. Debugging information concerning processing BGP
Execute debugging command in user view for the debugging of the related
vpn-instance information.
Table 37-37 Enable the debugging for processing BGP
Operation
Enable the debugging for
processing BGP
Disable the debugging
Operation
IP routing table
Operation
the vpn-instance
debugging bgp { all | event | normal | { keepalive |
mp-update | open | packet | update | route-refresh |
update } [ receive | send |] [ verbose ] }
undo debugging bgp { {all | event | normal |
keepalive | mp-update | open | packet | update |
route-refresh } [ receive | send | verbose ] } { all |
event | normal | update }
37-26
Chapter 37 BGP/MPLS VPN Configuration
Command
display ip routing-table
vpn-instance-name [ [ip-address ] [ verbose ] |
statistics ]
related
display
[ vpn-instance-name | verbose ]
Command
vpn-instance
Command
ip vpn-instance