Clearing Multicast Route Entries From Pim Routing Table; Clearing Pim Neighbors; Displaying And Debugging Pim-Dm - 3Com 8800 Configuration Manual

3Com Switch 8800 Configuration Guide
Table 28-6 Configuring the maximum number of PIM neighbor on an interface
Configure the maximum number of PIM neighbor on an
interface
Restore the limit of PIN neighbor to the default value
By default, the PIM neighbors on the interface are limited to 128.
If the number of PIM neighbors of an interface has exceeded the configured value by
the time of configuration, the existing PIM neighbors will not be deleted.

28.2.8 Clearing multicast route entries from PIM routing table

Perform the following configuration in user view.
Table 28-7 Clearing multicast route entries from PIM routing table
Operation
Clear
route entries from
PIM routing table

28.2.9 Clearing PIM Neighbors

Perform the following configuration in user view.
Table 28-8 Resetting PIM neighbor
Operation
Clear
neighbors

28.3 Displaying and Debugging PIM-DM

After the above configuration, execute display command in any view to display the
running of PIM-DM configuration, and to verify the effect of the configuration.
Execute debugging command in user view for the debugging of PIM-DM.
Operation
reset pim routing-table { all | { group-address [ mask
multicast
{ group-mask | group-mask-length } ] | source-address [ mask
{ source-mask | source-mask-length } ] | { incoming-interface
{ interface-type interface-number | null } } } * }
PIM reset pim neighbor { all | { neighbor-address | interface
interface-type interface-number } * }
Chapter 28 PIM-DM Configuration
Command
Command
28-6
Command
pim neighbor-limit
limit
pim neighbor-limit