Resetting Bgp Connections; Displaying And Debugging Mbgp Configuration - 3Com 8800 Configuration Manual

3Com Switch 8800 Configuration Guide

31.2.14 Resetting BGP Connections

After changing the MBGP policy or protocol configuration, users must disconnect the
present BGP connection to make the new configuration effective.
For details, refer to "BGP Configuration" of the Routing Protocol part of this manual.

31.3 Displaying and Debugging MBGP Configuration

After the above configuration, execute display commands in any view to display the
running information of MBGP, and to verify the effect of the configuration.
Execute the debugging command in user view for the debugging of MBGP.
Table 31-14 Displaying and debugging MBGP configuration
Display an MBGP routing table
Display CIDR (classless inter-domain
routing)
Display the routing information about
the specified MBGP community
Display the routes permitted by the
specified MBGP community list
Display the routes with inconsistent
source autonomous systems
Display the routing information to or
from a specified multicast neighbor
Display
advertised by MBGP
Display the peer group information
Display the AS path information
matching the AS regular expression
Disable/enable
UPDATE packets
Operation
the routing information
debugging MBGP
Chapter 31 MBGP Multicast Extension Configuration
display bgp
[ ip-address [ mask ] ]
display bgp multicast routing-table cidr
display bgp
community
no-export-subconfed | no-advertise |
no-export ]* [ whole-match ]
display bgp
community-list
[ whole-match ]
display bgp
different-origin-as
display bgp
[ peer-address ] [ verbose ]
display bgp multicast network
display bgp
[ group-name ]
display bgp
regular-expression as-regular-expression
[ undo ] debugging bgp mp-update
[ receive | send ] [ verbose ]
31-11
Command
multicast routing-table
multicast routing-table
[ aa:nn
multicast routing-table
community-list-number
multicast routing-table
multicast
multicast group
multicast routing-table
|
peer