Garmin G1000 Pilot's Manual page 57

Setting the generic timer (AUX – UTILITY Page):
1) Use the FMS Knob to select the AUX – UTILITY Page.
2) Push the FMS Knob to activate the flashing cursor.
3) Turn the small FMS Knob to select the timer counting direction (UP/DN) and press the ENT Key.
4) If a starting time is desired:
a) Turn the large FMS Knob to highlight the 00:00:00 Field.
b) Use the FMS Knob to enter the desired time (HH:MM:SS) and press the ENT Key.
5) Turn the large FMS Knob to highlight 'START?' and press the ENT Key to start the timer. The field changes to
'STOP?'.
6) To stop the timer, press the ENT Key with 'STOP?' highlighted. The field changes to 'RESET?'.
7) To reset the timer, press the ENT Key with 'RESET?' highlighted. The field changes back to 'START?' and the
digits are reset.
190-02692-00 Rev. A
Figure 1-24 Generic Timer on PFD REFERENCES Window
Figure 1-25 Timers on AUX – UTILITY Page
Garmin G1000 Pilot's Guide for the Piper PA-32 Saratoga
SYSTEM OVERVIEW
37