Garmin G1000 Pilot's Manual page 207

Changing the location of an existing waypoint to the aircraft present position:
1) Enter a waypoint name or select the waypoint in the USER WAYPOINT LIST Box, then press the ENT Key.
2) Press the MENU Key.
3) Select 'Use Present Position'.
4) Press the ENT Key twice. The new waypoint's location is saved.
5) Push the FMS Knob to remove the flashing cursor.
A system generated comment for a user waypoint incorporates the reference waypoint identifier, bearing,
and distance. If a system generated comment has been edited, a new comment can be generated.
Resetting the comment field to the system generated comment:
1) Enter a waypoint name or select the waypoint in the USER WAYPOINT LIST Box, then press the ENT Key.
2) Press the MENU Key.
3) Select 'Auto Comment'.
4) Press the ENT Key. The generated comment is based on the reference point used to define the waypoint.
The default type of user waypoint (normal or temporary) can be changed using the user waypoint
information page menu. Temporary user waypoints are automatically deleted upon the next power cycle.
Changing the user waypoint storage duration default setting:
1) With the WPT – USER WPT INFORMATION Page displayed, press the MENU Key.
2) Move the cursor to select 'Waypoint Setup', and press the ENT Key.
3) Select NORMAL or TEMPORARY as desired, and press the ENT Key.
4) Push the FMS Knob to remove the flashing cursor and return to the WPT – USER WPT INFORMATION Page.
DELETING USER WAYPOINTS
Deleting a single user waypoint:
1) Highlight a User Waypoint in the User Waypoint List, or enter a waypoint in the User Waypoint field.
2) Press the DELETE Softkey or press the CLR Key. YES is highlighted in the confirmation window.
3) Press the ENT Key.
4) Push the FMS Knob to remove the flashing cursor.
Or :
1) Highlight a User Waypoint in the USER WAYPOINT LIST Box, or enter a waypoint in the User Waypoint field.
2) Press the MENU Key.
3) Select 'Delete User Waypoint'.
4) Press the ENT Key twice to confirm the selection.
5) Push the FMS Knob to remove the flashing cursor.
190-02692-00 Rev. A Garmin G1000 Pilot's Guide for the Piper PA-32 Saratoga
FLIGHT MANAGEMENT
187