Garmin G1000 Pilot's Manual page 163

The symbols used in the PFD status box are:
Symbol Description
Active Leg
Direct-to
Right Procedure Turn
Left Procedure Turn
Right Holding Pattern
The Navigation Data Bar located at the top of the MFD contains four data fields, each displaying one of the
following items:
BRG
Bearing
DIS Distance
DTK Desired Track
END
Endurance
ENR
ETE to Final Destination
ESA
Enroute Safe Altitude
ETA Estimated Time of Arrival
ETE Estimated Time Enroute
FOB
Fuel on Board
FOD
Fuel over Destination
The navigation information displayed in the four data fields can be selected on the MFD DATA BAR FIELDS
Box on the AUX – SYSTEM SETUP Page. The default selections (in order left to right) are GS, DTK, TRK, and
ETE.
Changing a field in the MFD Navigation Data Bar:
1) Select the AUX – SYSTEM SETUP Page.
2) Push the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the desired field number in the MFD DATA BAR FIELDS Box.
4) Turn the small FMS Knob to display and scroll through the data options list.
5) Select the desired data option.
6) Press the ENT Key. Pressing the DFLTS Softkey returns all fields to the default setting.
190-02692-00 Rev. A
Figure 5-4 MFD Navigation Data Bar
Garmin G1000 Pilot's Guide for the Piper PA-32 Saratoga
Symbol Description
Left Holding Pattern
Vector to Final
Right DME Arc/Radius to Fix Leg
Left DME Arc/Radius to Fix Leg
GS
Ground Speed
ISA ISA Relative Temperature
LDG ETA at Final Destination
MSA Minimum Safe Altitude
TAS
True Air Speed
TKE
Track Angle Error
TRK Track
VSR Vertical Speed Required
XTK
Crosstrack
FLIGHT MANAGEMENT
143