Garmin G1000 Pilot's Manual page 305

Integrated flight deck for the piper pa-32 saratoga series
Hide thumbs Also See for G1000:
Table of Contents

Advertisement

NOTE: If a GDL 69/69A SXM receiver is installed, the Cyclone weather product is not available unless at
least one cyclone or tropical storm has been received. The weather product age indicates 'N/A' when no
cyclone or tropical storm has been received.
Displaying cyclone (hurricane) track information:
1) Select the MAP - WEATHER DATA LINK (XM) Page.
2) Press the MORE WX Softkey.
3) Press the CYCLONE Softkey.
To display the Cyclone legend, press the LEGEND Softkey when Cyclones are selected to be displayed.
ICING (CIP & SLD)
NOTE: Icing data cannot be displayed at the same time as NEXRAD data is selected for display.
Current Icing Product (CIP) data shows a graphical view of the icing environment. Icing severity is displayed
in four categories: light, moderate, severe, and extreme (not specific to aircraft type). The CIP product is not
a forecast, but a presentation of the conditions at the time of the analysis.
Supercooled Large Droplet (SLD) icing conditions are characterized by the presence of relatively large,
super cooled water droplets indicative of freezing drizzle and freezing rain aloft. SLD threat areas are depicted
as magenta dots over the CIP colors. SLD conditions may be extremely hazardous to all aircraft.
Displaying Icing data:
1) Select the MAP - WEATHER DATA LINK (XM) Page.
2) Press the MORE WX Softkey.
3) Press the ICNG (Softkey changes based on selection) Softkey.
4) Select the desired altitude level: 1,000 feet up to 30,000 feet. Press the NEXT or PREV Softkey to cycle
through the altitude softkeys. The ICNG Softkey label changes to reflect the altitude selected.
190-02692-00 Rev. A
Figure 6-32 Cyclone Legend
Garmin G1000 Pilot's Guide for the Piper PA-32 Saratoga
HAZARD AVOIDANCE
285

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents