Garmin G1000 Pilot's Manual page 407

When no terminal procedure chart is available for the nearest airport or the selected airport, the banner
CHART NOT AVAILABLE appears on the screen. The CHART NOT AVAILABLE banner does not refer to
the Jeppesen subscription, but rather the availability of a particular airport chart selection or procedure for a
selected airport.
If there is a problem in rendering the data (such as a data error or a failure of an individual chart), the banner
UNABLE TO DISPLAY CHART is then displayed.
When a chart is not available by pressing the SHW CHRT Softkey or selecting a Page Menu Option, charts
may be obtained for other airports from the WPT Pages or Flight Plan Pages.
If a chart is available for the destination airport, or the airport selected in the active flight plan, the chart
appears on the screen. When no flight plan is active, or when not flying to a direct-to destination, selecting the
SHW CHRT Softkey displays the chart for the nearest airport, if available.
The chart shown is the one associated with the WPT – Airport Information page. Usually this is the airport
runway diagram. Where no runway diagram exists, but Take Off Minimums or Alternate Minimums are
available, that page appears. If Airport Information pages are unavailable, the Approach Chart for the airport
is shown.
190-02692-00 Rev. A
Figure 8-6 Option Menus
Figure 8-7 Chart Not Available Banner
Figure 8-8 Unable To Display Chart Banner
Garmin G1000 Pilot's Guide for the Piper PA-32 Saratoga
ADDITIONAL FEATURES
387