Garmin G1000 Pilot's Manual page 54

SYSTEM OVERVIEW
Com C
onfiGUration
The COM CONFIG Box on the AUX – SYSTEM SETUP Page allows the pilot to select 8.33 kHz or 25.0
kHz COM frequency channel spacing.
Changing COM channel spacing:
1) Use the FMS Knob to select the AUX – SYSTEM SETUP Page.
2) Push the FMS Knob to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the CHANNEL SPACING Field in the COM CONFIG Box.
4) Turn the small FMS Knob to select the desired spacing and press the ENT Key.
a a
irsPaCe lerts
Refer to the Flight Management Section of this manual for further discussion.
a a
rrival lerts
Refer to the Flight Management Section of this manual for further discussion.
f D
liGht ireCtor
Not pilot configurable.
mfD D B
ata ar
Refer to the Flight Management Section of this manual for further discussion.
n a
earest irPorts
Refer to the Flight Management Section of this manual for further discussion.
34
f
ormat
f
ielDs
Garmin G1000 Pilot's Guide for the Piper PA-32 Saratoga 190-02692-00 Rev. A