SYSTEM OVERVIEW
Figure 1-20 System Time (LOCAL 24hr Format)
Configuring the system time:
1) Use the FMS Knob to select the AUX – System Setup Page.
2) Push the FMS Knob to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the TIME FORMAT Field.
4) Turn the small FMS Knob to select the desired format and press the ENT Key to confirm selection. The TIME
OFFSET Field is highlighted.
5) Turn the FMS Knob to enter the desired time offset (±HH:MM) and press the ENT Key to confirm selection.
Figure 1-21 Date/Time Settings on AUX – SYSTEM SETUP Page
190-02692-00 Rev. A
Garmin G1000 Pilot's Guide for the Piper PA-32 Saratoga
31