Bosch Rexroth Nexo Project Planning page 211

Cordless wi-fi nutrunner
Hide thumbs Also See for Rexroth Nexo:
Table of Contents

Advertisement

3 608 870 A47
File Share
Settings  Data  Standard Nexo  File Share
Use this menu item to define the configuration of the File Share connection for results output.
Table 9–60:
Element
Active
IP address / DNS
Group ID
User ID
Directory
Type
Save
Discard
Data
Storage
Restore defaults
1. This refers to the root directory for the registered user. This directory can be located several levels
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2017-05
File Share index card
below the actual root directory of the drive. If no directory has been entered, the root directory for the
indicated user will automatically be used as the storage location.
Tightening Technology | Bosch Rexroth AG 211/263
Description
Enable the check box to activate data output via File Share.
If results output is disabled, no more results files will be generated. Results
files which have already been generated and still exist will not be output be-
fore
File Share output has been reactivated.
Either directly enter the IP address of the File Share server or the DNS entry
of the File Share server.
Enter the group ID for File Share connection.
The group ID has to be valid on the File Share server and has to have write
access to the target directory and authorization to create directories. If nec-
essary, ask your system administrator whether the user has write access.
Enter the user ID for File Share connection.
The user ID has to be valid on the File Share server and has to have write ac-
cess to the target directory and authorization to create directories. If neces-
sary, ask your system administrator whether the user has write access.
1
Enter the directory
for the tightening results on the File Share server.
Select the classification of data:
– NFS
For Unix and Linux operating systems.
– CIFS
CIFS (Common Internet File System) for Windows operating systems.
Click Save to save the edited data.
Click Discard to discard the edited data.
See
Data button (page 212)
See
File button (page 216)
All settings in this dialog are reset to the factory setting.

Advertisement

Table of Contents
loading

Table of Contents