Bosch Rexroth Nexo Project Planning page 193

3 608 870 A47
ID code
Table 9–29:
Element
Combine multiple ID inputs
Example: Combine multiple ID inputs
The results of one ID input step in the mode and three ID input steps in the job are combined in one ID
code in the single program step.
Fig. 9–3:
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2017-05
Single program dialog - ID code panel
Description
If the check box is enabled, the results of various
ID input steps can be combined in an ID code. To create the new ID code,
you can define a prefix and a postfix as well as a max. of 10 more compo-
nents.
You can select the following values:
– $Mode
– Userdefined Text
– IDInput<xx>
The ID code will be displayed on the tool display.
Mode ID input step Target selection: ID code
Job ID input step Target selection: ID code
Identifier: $ID input1@ A2
Job ID input step Target selection: ID code
Identifier: $ID input2@ A3
Job ID input step Target selection: ID code
Identifier: $ID input3@ A4
Job Single program step
Combination of various ID inputs:
Part 1 = $mode
Part 2 = $ID input1@ A2
Part 3 = $ID input2@ A3
Part 4 = $ID input3@ A4
Example: Combine multiple ID inputs
Tightening Technology | Bosch Rexroth AG 193/263
Result of the mode.
User defined text.
Result of a scan step of the respective job.
Example: $ID Input1@A2 is the result in the step, column A, line 2.
NEXO
OS
V
1100
NEXOOSV1100