Table of Contents
Advertisement
7.5.3.17
Error numbers
Table 7–49:
Error no.
01
02
03
04
06
07
08
09
10
11
12
13
14
15
16
35
36
37
38
58
70
82
83
86
87
96
98
Error numbers
Description
Invalid data
Tightening program not available
Tightening program cannot be specified
Tightening program not active
Activation of ID code upload already available
Activation of ID code upload not available
Entry source for ID code not permissible
Activation for the last tightening result already available
Activation for the last tightening result not available
Activation of system errors already available
Activation of system errors not available
Subscription for tightening program selection already available
Subscription for tightening program selection is not available
Requested tightening ID not found
Connection rejected, max. number of connections exceeded
There is already a subscription for changes in the battery level.
There is no subscription for changes in the battery level.
There is already a subscription for changes in the reception quality.
There is no subscription for changes in the reception quality.
No system error available
Calibration failed
Activation for automatic/manual mode already available
Activation for automatic/manual mode not available
Activation for output signal change already available
Activation for output signal change not available
Client already connected
Request timeout in the controller or PLC signal not assigned in the PLC assignment table or Open
oprtcl
Protocol PLC module (
) not configured.
Tightening Technology | Bosch Rexroth AG 161/263
Advertisement
Table of Contents
