Firmware - Bosch Rexroth Nexo Project Planning

3 608 870 A47
9.8.6

Firmware

Settings  Firmware
This menu item is used to display the firmware version and to start the firmware update.
When the firmware is updated, the NEXO-OS operating system is also updated.
As of version 1100 of the Nexo firmware, firmware updates can only be started with a capacity of the bat-
tery pack slide-in module of  25%.
After the new firmware version has been uploaded, the Nexo cordless Wi-Fi nutrunner is rebooted. There-
after, the new firmware is effective for the Nexo cordless Wi-Fi nutrunner.
Table 9–73:
Element
Refresh
Firmware update was not carried out or canceled:
In this case restart the firmware update via the NEXO-OS. If the firmware update fails again, remove the
battery pack slide-in module of the nutrunner, wait until the nutrunner is de-energized and reinsert the bat-
tery pack. Start the nutrunner and wait until it is started up. Start the firmware update again via the NEXO-
OS.
Table 9–74:
Element
Previously installed firmware and
configurations
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2017-05
Firmware tab - firmware
Description
Click Update to load a new firmware version:
1. The Update nutrunner firmware dialog is opened.
2. Select the file (*.nxfw) for updating the firmware.
3. Click Update to start the update. Click Cancel to stop the update.
Firmware tab - previously installed firmware and configurations
Description
Click the Start button to load the previously installed firmware version and
the respective configurations.
Tightening Technology | Bosch Rexroth AG 225/263