Bosch Rexroth Nexo Project Planning page 191

3 608 870 A47
Options
Table 9–23:
Element
Show text at the nutrunner display You can save a text for all job steps. The text will be displayed on the tool dis-
Display time
Job abort when NOK result in job
step
Delete ID code in end step
9.6.3.2 ID input
In this step, define the settings for the treatment of the ID input.
General
Table 9–24:
Element
Identifier
Name
Comments
ID input options
Table 9–25:
Element
Source selection ID input
Choose target for ID input
Masking
Tool display text
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2017-05
Start step dialog - options panel
Description
play.
Indication how long the text will be displayed at the tool display.
Default setting: 1 second
Cancels the job as soon as the job step supplies a NOK result.
Removes the ID code from the input buffer. A new ID code must be transmit-
ted to the system for the next job.
Click the icon to insert a new ID input step in the job program before the selected step.
Double clicking the step or the respective icon opens the corresponding dialog for entering
the parameters.
ID input step dialog - general panel
Description
Name for the clear identification of the step.
Step name
Admissible characters are ASCII characters, numbers, spaces, hyphens,
dashes and underscore.
Description of the step
Admissible characters are ASCII characters, numbers, spaces, hyphens,
dashes and underscore.
ID input step dialog - ID input options panel
Description
Use this selection to set the source of the ID input of this step.
– Open Protocol
The ID input made available via Open Protocol is used for generating the
ID code.
– Scanner
The valid barcode scanned last is used as ID code.
ID code (display only):
The ID input is used as ID code for this step.
Selects where the ID input and the ID code are used. Enter numbers and/or
ranges separated by semicolon. Masking counts up from 1.
Example:
Read-in bar code: N25E9XO12345
Masking: 1;4;6-11
ID code part: NEXO1234
You can save a text for all steps. The text will be displayed on the tool display.
Tightening Technology | Bosch Rexroth AG 191/263