Toshiba SD-H400-S-TU Installation Manual page 199

C h a p t e r 8
Questions About Audio/Video
The audio and video are out of sync.
• The audio and video may re-sync if you change channels.
• You may be able to re-sync audio and video by pressing the QUICK button on the remote control.
• Audio and video should re-sync if you press the TiVo button to go to TiVo Central, then press the LIVE TV button to return to live
television.
• You can also try restarting your DVR. From TiVo Central, select Messages & Setup, then Restart or Reset System, then Restart the
Digital Media Server. On the Restart Digital Media Server screen, press the THUMBS DOWN button three times, then press ENT.
You will see the Welcome screen and the system will restart within about 45 seconds.
My DVR was working, but now the picture does not move.
• Try restarting your DVR. From TiVo Central, select Messages & Setup, then Restart or Reset System, then Restart the Digital Media
Server. On the Restart Digital Media Server screen, press the THUMBS DOWN button three times, then press ENT. You will see the
Welcome screen and the system will restart within about 45 seconds. You can also restart the DVR by unplugging it, waiting 15
seconds, then plugging it back in.
I don't get a picture now, even though I have been able to get one in the past.
• Someone in your household may have placed the DVR in Standby mode. To return to normal mode from Standby, press either the
TiVo button or the LIVE TV button. (There is also a POWER button on the remote control that puts the DVR in Standby mode and
takes it back out.)
• Your TV may not be set to the correct input. Most TVs have an input button that says either "TV/Video," "Input," or "Source." It
may be on the TV or on the TV remote control. Look at your TV and TV remote and try changing the input for your TV.
114
T r o u b l e s h o o t i n g