Standby
You can put your DVR in Standby mode by pressing either the ON/STANDBY button on
the front of your DVR or the
Messages & Setup. To return to normal mode from Standby, press either the TiVo, LIVE
TV, or
button on your remote.
In Standby mode:
•
Your TV shows a black screen and the ON/STANDBY light on the front of the DVR
turns red.
•
Programs that are being recorded or are scheduled to record will still be recorded.
•
The DVR will still make a connection to the TiVo service, if scheduled to do so.
•
If you temporarily turned off TV Parental Controls, Standby mode re-enables them.
(See page 31 for more on TV Parental Controls.)
•
The DVR will continue to save a portion of live TV—up to 30 minutes of
programming.
•
If live TV was paused when Standby was selected, the DVR will remain paused for up
to 30 minutes.
•
If the TiVo Live Guide was set to display a category filter, filtering will be turned off.
TiVo Central
Messages & Setup
button on your remote, or selecting Standby in
Standby
S t a n d b y
4
47