Instructions: Tv Power, Volume, And Tv Input - Toshiba SD-H400-S-TU Installation Manual

4ProgrammingRemote-New.fm Page 31 Monday, June 9, 2003 3:02 PM
Instructions
: TV Power, Volume, and TV Input
1. Prepare the remote control.
Point the remote away from your DM Server and cover the front end with your hand.
Refer to the table below and determine which two buttons to press to prepare the
remote. Press and hold the buttons simultaneously for more than 5 seconds.
TV power, volume,
To Control:
and mute
TV and TiVo
Press the:
buttons
2. Enter a code.
Use the number buttons on the remote control to enter a four-digit code (starting with
the first code in the list for the appropriate brand on page 34).
3. Test the code. Point the remote towards the TV and test the button (refer to the table):
TV power, volume,
To Test the:
and mute
TV button
Press the:
If pressing the button works (e.g., turns the TV or A/V stereo system off, or changes
the TV input), the code is correct. If it does not work, repeat steps 1 and 2 using the
next code on the list. If none of the codes works, perform a code search (see the next
page).
I n s t r u c t i o n s : T V
TV input A/V system power,
volume, and mute
TV/VIDEO and TV and TiVo
TiVo buttons buttons
TV input A/V system power,
volume, and mute
TV/VIDEO button TV button
P o w e r , V o l u m e , a n d
TV POWER
VOLUME
A/V system volume
and mute only
MUTE and TiVo
buttons
A/V system volume
and mute
MUTE button
T V I n p u t
TV/VIDEO
MUTE
4
31