Toshiba SD-H400-S-TU Installation Manual page 92

Digital media server
Hide thumbs Also See for SD-H400-S-TU:
Table of Contents

Advertisement

Satellite only,
or cable with a box only:
Satellite & antenna,
or satellite & cable
without a box**:
** Setups with two
program sources like
®
these are only
available after you upgrade
to TiVo Plus service. For more
1. Use the UP/DOWN arrows
information, visit
to highlight "Satellite Box"
www.tivo.com/upgrade
.
Satellite & cable with a box**:
1. Highlight "Satellite
2. Follow the directions
Box" and press SELECT.
at the top of this page
(marked with *).
C o m p l e t i n g G u i d e d S e t u p
* Use the UP/DOWN arrows until the picture of the DVR matches the cable
connection you used to connect your satellite or cable box. When the video
status below the picture says "Video OK," press SELECT to continue. If the
video status says "No Video," double-check that the video cable is firmly
connected to the DVR and that you have selected the correct type of video
cable.
2. Follow the directions at
the top of this page
(marked with *).
3. Highlight "Cable Box"
4. Follow the directions
and press SELECT.
at the top of this page
(marked with *).
3. Use the DOWN arrow to
highlight "Accept these
input settings" and press
SELECT.
5. Highlight "Accept
these input settings"
and press SELECT.
7
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sd-h400

Table of Contents