Overview Of Installing The Optical Ila - Juniper PTX3000 Hardware Manual

Overview of Installing the Optical ILA

To install and connect an optical ILA:
1. Follow the instructions in
the device is to be mounted and for instructions on how to mount the optical ILA in a rack or cabinet
2. Follow the instructions in:
Connecting the Optical ILA Grounding Cable on page 62
Unpacking and Mounting the Optical ILA on page 54
Connecting the Optical ILA to External Devices on page 58
3. Connect AC or DC power:
Connecting AC Power to an Optical ILA on page 63
Connecting DC Power to an Optical ILA on page 66
4. Configure the device following the instructions in: .
Optical ILA Modes of Operation on page 70
Optical ILA CLI System Commands on page 71
Optical ILA CLI show Commands on page 72
Optical ILA CLI Configuration Commands on page 78
Optical ILA CLI Upgrade Commands on page 85
RELATED DOCUMENTATION
Rack Requirements for the Optical ILA | 46
Optical ILA Cabinet Requirements | 47
Clearance Requirements for Airflow and Hardware Maintenance for an Optical ILA | 45
"Unpacking and Mounting the Optical ILA" on page 54 to determine how
53