Ctp System Overview - Juniper CTP1000 Series Hardware Manual

Chapter 1

CTP System Overview

CTP System Overview
This chapter describes the CTP hardware. It contains the following sections:
CTP System Overview on page 3
CTP1000-Series Models on page 5
CTP2000-Series Models on page 9
CTP2000-Series Modules on page 14
Cables on page 28
The following CTP1000- and CTP2000-series models are available:
CTP1000 series
CTP1002 (AC only)
CTP1004 (DC and AC)
CTP1012 (AC only)
CTP2000 series
CTP2008 (DC and AC)
CTP2024 (DC and AC)
CTP2056 (DC and AC)
All models use the same software and share a system architecture and common
components.
The CTP1002 model is 1U high and a half-rack wide, and is designed for installation
on a tabletop, on a shelf, or in a rack with the supplied rack mount kit. The
CTP1004 and CTP1012 models use an industrial 1-U rack-mount case. The
CTP2000-series models are multicard chassis ranging from 1U–4U high.
3
CTP System Overview