Optical Ila Physical Specifications; Optical Ila Rack Requirements; Rack Requirements For The Optical Ila - Juniper PTX3000 Hardware Manual

Optical ILA Physical Specifications

Table 15 on page 46 lists the physical specifications for the optical ILA chassis and components.
Table 15: Physical Specifications for the Optical ILA
Model
Numbers Fans and Power
PTX-ILA-M-AC 3 fan modules and 2
AC power supplies
installed
PTX-ILA-M-DC 3 fan modules and 2
DC power supplies
installed

Optical ILA Rack Requirements

The optical ILA chassis is designed to be installed in two-post or four-post racks.
Rack requirements consist of:
Rack type
Mounting bracket hole spacing
Rack size and strength
Table 16 on page 46 provides the rack requirements and specifications for the optical ILA.
Table 16: Rack Requirements for the Optical ILA
Rack Requirement
Rack type: two-post or
four-post
Height
1.72 in.
(4.36 cm)
1.72 in.
(4.36 cm)
Guidelines
Use a two-post or four-post rack that provides bracket patterns spaced at 1-U (1.75 in.
or 4.45 cm) increments and that meets the size and strength requirements to support the
weight.
A U is the standard rack unit defined in Cabinets, Racks, Panels, and Associated Equipment
(document number EIA-310–D) published by the Electronics Components Industry
Association (http://www.ecianow.org/).
Width Depth
17.24 in. 9.6 in. (24.4 cm)
(43.8 cm) without handles for
fans or power
supplies.
17.4 in. 9.8 in. (24.89 cm)
(44.19 cm) without handles for
fans or power
supplies.
46
Weight
With
field-replaceable
units (FRUs)
installed: 11.7 lb
(5.30 kg)
With FRUs installed:
11.8 lb (5.35 kg)