Optical Ila Dc Power Specifications - Juniper PTX3000 Hardware Manual

NOTE: In North America, AC power cords must not exceed 14.75 feet (approximately 4.5 meters)
in length, to comply with National Electrical Code (NEC) Sections 400-8 (NFPA 75, 5-2.2) and
210-52 and Canadian Electrical Code (CEC) Section 4-010(3). The cords that can be ordered for
the optical ILA are in compliance.
Table 10 on page 37 lists AC power cord specifications provided for each country or region.
Table 10: AC Power Cord Specifications for the Optical ILA
Country
Australia
China
Europe (except Italy
and United Kingdom)
Italy
Japan
North America
United Kingdom

Optical ILA DC Power Specifications

Table 11 on page 38 describes the DC power specifications for an optical ILA.
NOTE: We recommend that the 48 VDC facility DC source be equipped with a circuit breaker
rated at 10 A (–48 VDC) minimum, or as required by local code.
We recommend that the 60-VDC facility DC source be equipped with a circuit protector rated
at 5 A (–60 VDC) minimum, or as required by local code.
Model Number
CBL-GP-JX-PWR-AU
CBL-GP-JX-PWR-CH
CBL-GP-JX-PWR-EU
CBL-GP-JX-PWR-IT
CBL-GP-JX-PWR-JP
CBL-GP-JX-PWR-US
CBL-GP-JX-PWR-UK
Electrical Specification
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
125 VAC, 12 A, 50 Hz or 60 Hz
125 VAC, 10 A, 60 Hz
250 VAC, 10 A, 50 Hz
Plug Type
AS/NZ 3112–1993
GB2099.1 1996 and
GB1002 1996 (CH1-10P)
CEE (7) VII
IEC60884-1
JIS 8303 and 8306
NEMA 5-15P
BS1363
37