Management Port Connector Pinouts For The Optical Ila - Juniper PTX3000 Hardware Manual

Table 19: Cable Specifications for Console and Management Connections for the Optical ILA
Port on optical
ILA Cable Specification
Console (CON) port RS-232 (EIA-232) serial
cable
Management Category 5 cable or
(MGMT) port equivalent suitable for
1000BASE-T operation

Management Port Connector Pinouts for the Optical ILA

The 1000BASE-T management port (labeled MGMT) uses an RJ-45 connector to connect to a management
device for out-of-band management.
Table 20 on page 50 provides the pinout information of the RJ-45 management port connector. An RJ-45
cable is supplied with the optical ILA.
Table 20: RJ-45 Management Port Connector Pinouts for the Optical ILA
Pin
1
2
3
4
5
6
7
8
Cable Supplied
One 7-foot (2.13-meter)-long
RJ-45 patch cable and RJ-45
to DB-9 adapter
One 7-foot (2.13-meter)-long
RJ-45 patch cable
Signal
TRP1+
TRP1–
TRP2+
TRP3+
TRP3–
TRP2–
TRP4+
TRP4–
Maximum Device
Length Receptacle
7 feet RJ-45
(2.13 meters)
328 feet RJ-45
(100 meters)
Description
Transmit/receive data pair 1
Transmit/receive data pair 1
Transmit/receive data pair 2
Transmit/receive data pair 3
Transmit/receive data pair 3
Transmit/receive data pair 2
Transmit/receive data pair 4
Transmit/receive data pair 4
50