Optical Ila Ac Power Specifications; Optical Ila Ac Power Cord Specifications - Juniper PTX3000 Hardware Manual

Table 8: Optical ILA DC Power Supply LED (continued)
Name Color
DC IN OK Unlit
Green
Red

Optical ILA AC Power Specifications

Table 9 on page 36 describes the AC power specifications for an optical ILA.
Table 9: AC Power Specifications for an Optical ILA
Item
AC input voltage
AC input line frequency
AC input current rating
Typical power consumption
Maximum power consumption

Optical ILA AC Power Cord Specifications

Detachable AC power cords are shipped with the chassis if you include them as part of your order. The
coupler is type C13 as described by International Electrotechnical Commission (IEC) standard 60320. The
plug end of the power cord fits into the power source outlet that is standard for your geographical location.
State Description
Off There is no power to the power supplies.
On steadily The power supply is on and operating correctly.
On steadily The power supply is on standby mode (DC IN present).
On steadily There is a power supply failure.
Blinking There is no DC power to this power supply only.
Specification
Operating range: 100–240 VAC
50–60 Hz
3 A at 100–136 VAC
1.5 A at 180–266 VAC
75 W
115.5 W
36