PTX10008 Router Quick Start Guide
Step 3–Mounting the router Chassis
Installing the Mounting Hardware
6
Use a 13/32 in. (10 mm) open-end or socket wrench to remove the four sets of bracket
8.
bolts that secure the chassis to the shipping pallet (see
Figure 4: Bracket Bolt Removal
Unpack the accessory box and lay out the contents so that they are ready for use.
9.
Verify that your order includes all appropriate parts.
10.
Store the brackets and bolts inside the accessory box.
11.
Save the shipping box and packing materials in case you need to move or ship the
12.
router at a later time.
To install the PTX10008, first install the mounting hardware and then perform one of
these two procedures:
Installing the Mounting Hardware on page 6
Mounting the PTX10008 Using a Mechanical Lift on page 9
Manually Mounting a PTX10008 on page 11
Install the mounting hardware on the rack before installing the router. The PTX10008
comes with a four-piece set of mounting brackets that supports the chassis in the rack.
Figure 4 on page
6).
Copyright © 2017, Juniper Networks, Inc.