Daikin LXE10E-A14 Service Manual page 97

https://daikin-p.ru
GDisplaying temperature change trend:
The temperature change trend is shown in the leftmost LCD.
However, this display is shown only when all segments are in the same temperature range.
Trend indication
Temperature rise trend
Temperature stable tendency
Temperature fall tendency
※ According to setting point of H001, trend indication changes.
Refer to page 3-32 optional condition setting mode for the H001 setting procedure.
< Operation procedure >
CURRENT
INDICATION
MODE
 
Operation state
 
 
display
0/ 0/
CHART CHART
CHART
INDICATION
MODE
The latest the oldest
–
data on the data on the
chart chart
The latest the oldest
–
data on the data on the
chart chart
or
the oldest The latest
data on the – data on the
chart chart
the oldest The latest
–
data on the data on the
chart chart
To shift to the chart indication mode, press the
current indication mode.
In the chart indication mode, the LCD displays a simple graphic chart.
The ordinate at the left side of LCD screen for temperature base and the abscissa
at the bottom of LCD for time base are indicated.
The No. indicated at the time base is the same as the No. on the left most of the
LCD, which indicates the simple graphic chart is of 12 hours log or 6 days log
indication.
Select the base to be uses using the
0/
When the key is pressed, the unit goes back to the current indication mode.
CHART
3-63
Condition
> ※ set point of H001
(ALARM indication
setting)
<
set point of H001
<
set point of H001
>
set point of H001
0/
key while the unit is in the
CHART
or key.