Page 1
ダイキン海上コンテナ冷凍装置 Marine type Container Refrigeration Unit サービスガイド・パーツリスト Service Manual・Parts List オプション機能編・Optional Functions LXE10E-A32A LXE10E-A32B TR07-07...
Page 2
Covered Models Regarding the features and operation of the unit, the service guide describes the items which are different from those of the service manual TR01-09C. Different points from service manual Item (Maintenance and Repair) Suction thermometer check port...
Page 3
*Diffirences from standard model service manual (TR01-09C) are marked with ☆ CONTENTS SAFETY PRECAUTIONS 3.5.1 Specifications ........3-36 • Danger ..............3 3.5.2 Function..........3-36 • Warning..............4 3.5.3 Battery check • Caution..............5 (When using optional recargeable battery) ...3-36 1. INTRODUCTION..........1-1 3.5.4 Battery replacement 1.1 Operation range ..........1-1...
Page 4
7.7 Temperature conversion table and temperature 8.6.2 Attaching and removing of manifold gauge...8-50 sensor (DCHS) characteristics table....7-4 8.7 Pressure gauge..........8-52 7.8 High pressure transducer characteristics table ..7-4 9. OPTION FOR LXE10E-A32A,32B .....9-1 ☆ 7.9 Low pressure transducer characteristics table...7-4 9.1 Ventilation opening detector(FA Sensor) ..9-1...
Page 5
1.3.4 Adjust the ventilation CAUTION Adjust the opening of the lower or upper ventilator according to the cargo. When the ventilation amount is 80 m /h or more, Keep the ventilation closed during use the upper ventilator to adjust the amount.
Page 6
3. ELECTRONIC CONTROLLER 3.1 Function table ●DECOS 3d (Daikin Electronic Controller Operation System) (Note) [PC]: Functions using personal computer Function division Function DECOS3d ✓ Control function • Temperature control ✓ • Defrosting control • Humidity control Optional ✓ Initial setting •...
Page 7
Function of operation key ●UNIT ON/OFF key ●UP key UNIT ON/OFF To select the item to be set in To start or to stop the unit the selected mode. operation. The controller has a memory ●DOWN key DOWN function.
Page 8
Check on settings and operation conditions ※1. Current indication mode (indication of operation conditions) ●Supply air temperature (SS) Indicates the unit operation conditions. ●Return air temperature (RS) Page 3-9 ●Defrost interval ●Alarm ●Setting point humidity and humidity (OPTION) ※2. Operation setting mode ●Temperature settings...
Page 9
Indication of detailed data and alarm ※6. Sensor indication mode ●Discharge gas temperature (DCHS) Each sensor value can be indicated. ●Suction gas temperature (SGS) ●Modulating valve opening ●Fresh air quantity (FA) ●Electronic expansion valve opening ●High pressure (HPT) ●Supply air temperature (SS) ●Low pressure (LPT)
Page 10
6. SENSOR INDICATION MODE Each sensor value, the suction modulating valve (SMV) opening, the electronic expansion valve (EV) opening and the fresh air quantity (FA) can be checked. The following items are displayed: High pressure (HPT), low pressure (LPT), voltage (PT1), total current (CT1), compressor current (CT2),...
Page 11
(The initial setting for LXE10E-1 are underlined figures.) 2 : In CASE 3), the settings of "CHARTLS" and "USdA 1/2" shall be changed from default (Default of spare controller : CHARTLS=Off, UsdA=1) to set for LXE10E-A32A, A32B as below underlined.
Page 12
To set the power input: Select "Sing" or "dUAL" on the LED when the LCD displays "OC-SET" . Whenever the key is pressed, the indication of "Sing" or "dUAL" is INPUT POWER changed. Press the key to determine the setting.
Page 14
MANUAL CHECK SELECTION MODE The LED displays the values of following items: Compressor operating time, Evaporator fan motor high-speed running current, Evaporator fan motor low-speed running current, Condenser fan motor running current, Battery life, Horse power, Elapsed time after trip start, Evaporator fan motor running time, Condenser fan motor running time, and Controller software version.
Page 17
7.14 Stereoscopic wiring diagram board Line color BLK : Black, BLU: Bl ue , G RY: Gre y (6) At the two tightening positions of round crimp terminals Notes for wiring BRN: Bro wn, RED: Re d, YLW : Ye l l ow with M3.5 insulating sleeve (FN type) or tightening...
Page 18
9.1 Ventilation opening detector (FA sensor) Condenser fan FA sensor Control box Ventilation cover Connector ● Type: 5ZZ2157 This sensor has a main unit (i.e., wire winder block and position meter) and wire block. The wire tip is connected to the ventilation cover, ●...
Page 38
ORDERING INSTRUCTIONS The parts list contains the parts of the DAIKIN Marine Type Container Refrigeration Units. Please read the following items before using the list. 1. When ordering the parts, be sure to specify the model No., the name of part and the type of part.
Page 39
Denomination of Model Name L X E NOMINAL HORSE POWER 5 : 5 10 : 10 CONDENSER COOLING TYPE NIL : AIR and WATER COOLED TYPE A : AIR COOLED TYPE OPTION NUMBER Note) "R" GIVEN AFTER OPTION NUMBER STANDS FOR "REVISION"...
Page 40
C O N T E N T S 目 次 Page A. Parts related with the unit(outside)………………………………………………………………………40 庫外関連部品 B. Parts related with refrigerant piping(outside) …………………………………………………………42 庫外冷媒配管関連部品 C. Parts related with the unit(inside) ………………………………………………………………………46 庫内関連部品 D. Parts related with refrigerant piping(inside) …………………………………………………………48 庫内冷媒配管関連部品...
Page 41
Parts related with the unit(outside) 庫外関連部品 (Refer to 72Page) (Refer to 73Page)
Page 42
Parts related with the unit(outside) 庫外関連部品 QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME LXE10E- 部品名称 符号 部品番号 図面番号 形式 仕様 備考 A32A A32B 1448270 Power plug 3P109727-1 電源プラグ 0954936 Condenser fan motor 3P005566-1 凝縮器電動機 0980618 Fan Brade(outside)
Page 43
Parts related with refrigerant piping(outside) 庫外冷媒配管関連部品 B7-6 B11詳細(Detail of B11) Discharge pipe Feeler bulb inserting pipe B7-4 B7-3 B7-7 B13詳細(Detail of B13) B7-1 Suction pipe Feeler bulb inserting pipe B7-8 B7-5 B12詳細(Detail of B12) B8-1-1 B8-1-2 B7-2 B8-1-3 B8-1-5 View A-A B8-1-4 B6-1 B8-1 B3-2 B5-2 B5-1...
Page 44
Parts related with refrigerant piping(outside) 庫外冷媒配管関連部品 QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME LXE10E- 部品名称 符号 部品番号 図面番号 形式 仕様 備考 A32A A32B 1315426 Compressor JT224D-NYR 圧縮機 1387173 Air cooled condenser 2P089486-1 CA-LXE10E1 空冷凝縮器 1813696 Air cooled condenser...
Page 45
Parts related with refrigerant piping(outside) 庫外冷媒配管関連部品 QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION INDEX PARTS NAME LXE10E- 部品名称 符号 部品番号 図面番号 形式 仕様 A32A A32B B8-1-4 1270408 Body, suction modulating valve 2P078385-1-KE 吸入比例弁弁本体 B8-1-5 1270415 Cover band, suction modulating valve 吸入比例弁カバーバンド...
Page 46
Parts related with refrigerant piping(outside) 庫外冷媒配管関連部品 QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME LXE10E- 部品名称 符号 部品番号 図面番号 形式 仕様 備考 A32A A32B...
Page 47
Parts related with the unit(inside) 庫内関連部品 C1-2 C1-1 Option Option E57詳細(Detail of E57) Sealing compound (KE44RTV or its equivalent) シール剤 INSIDE (KE44RTV又は相当品) OUTSIDE PUTTY (Equivalent of NEO-SEAL B-1) パテ (ネオシールb-1相当品) C36詳細(Detail of C36) <Without recorder> DRS(Blue・Red) RS(Blue) C23詳細(Detail of C23) <Without recorder>...
Page 48
Parts related with the unit(inside) 庫内関連部品 QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME LXE10E- 部品名称 符号 部品番号 図面番号 形式 仕様 備考 A32A A32B C1-1 0955340 Three phase AC fan motor 3PA07524-5 SPRK91A-42 三相交流ファン電動機 C1-2 0955333 Three phase AC fan motor...
Page 49
Parts related with refrigerant piping(inside) 庫内冷媒配管関連部品 D4詳細(Detail of D4) D3-3 D3-7 D3-4 D3-5 D3-2 Feeler bulb D3-2 inserting pipe D5詳細(Detail of D5) D3-8 D3-6 D3-1 D3-9 D3-10...
Page 50
Parts related with refrigerant piping(inside) 庫内冷媒配管関連部品 QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME LXE10E- 部品名称 符号 部品番号 図面番号 形式 仕様 備考 A32A A32B 1683927 Evaporator ass'y 2P163797-1 CRB-LXE10E9 蒸発器組立品 1787470 Evaporator ass'y 2P195931-1 CRB-LXE10E15 蒸発器組立品 1683934 ass'y for pipe of drain pan ドレンパン配管組立品...
Page 51
Other parts(Pipe clamp, sealing and insulation material etc.) その他部品(配管固定具、シール材、防熱材等) C詳細(Detail of C) B詳細(Detail of B) Tie wrap Wires E断面(Section of E) Condenser coil...
Page 52
Other parts(Pipe clamp, sealing and insulation material etc.) その他部品(配管固定具、シール材、防熱材等) ※(L = XX mm) indicates the length of cushion rubber E35.(Cut to suit pipe size.) ※(L = XX mm)と表記のものは、緩衝ゴム(E35)の長さです。(配管のサイズに合わせて切って使用ください。) 矢視A/B(View A/B) 矢視D(View D) (L=65mm) 受液機器部詳細 (L=90mm) (Receive part detail) E7/8 (L=60mm) ドライヤー部詳細 圧力センサー配管部詳細 (Dryer part detail) (Pressure tranducer detail) E31(L=40mm)
Page 53
Other parts(Pipe clamp, sealing and insulation material etc.) その他部品(配管固定具、シール材、防熱材等) 矢視A(VIEW A)
Page 54
Other parts(Pipe clamp, sealing and insulation material etc.) その他部品(配管固定具、シール材、防熱材等) FAN GUIDE ファンガイド...
Page 55
Other parts(Pipe clamp, sealing and insulation material etc.) その他部品(配管固定具、シール材、防熱材等)...
Page 56
Other parts(Pipe clamp, sealing and insulation material etc.) その他部品(配管固定具、シール材、防熱材等) QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME LXE10E- 部品名称 符号 部品番号 図面番号 形式 仕様 備考 A32A A32B 1266694 Set plate, discharge pipe 4P079462-1 Page 51 吐出配管取付板 1779727 Set plate, discharge pipe...
Page 57
Other parts(Pipe clamp, sealing and insulation material etc.) その他部品(配管固定具、シール材、防熱材等) QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME LXE10E- 部品名称 符号 部品番号 図面番号 形式 仕様 備考 A32A A32B 1624290 Supply sensor sealing 4P154324-1 Page 53 シール材(1) 1624290 Supply sensor sealing...
Page 58
Other parts(Pipe clamp, sealing and insulation material etc.) その他部品(配管固定具、シール材、防熱材等) QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME LXE10E- 部品名称 符号 部品番号 図面番号 形式 仕様 備考 A32A A32B...
Page 64
Parts related with name plate 銘板関連 QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME LXE10E- 部品名称 符号 部品番号 図面番号 形式 仕様 備考 A32A A32B 1557042 Name plate, operation 操作銘板(C&MODE,英) 1P136900-1 Refer to Page72 1726552 Name plate, Brand name and refrigerant label 意匠銘板および冷媒銘板...
Page 65
Parts related with option 1 – USDA オプション関連部品1 – USDA関連...
Page 66
Parts related with option 1 – USDA オプション関連部品1 – USDA関連 QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME LXE10E- 部品名称 符号 部品番号 図面番号 形式 仕様 備考 A32A A32B 1622580 Mounting plate ass'y, receptacle USDA取付板(樹脂) 2P146266-1 0991531 PC port connector 3P010803-1 パソコンポートコネクタ...
Page 67
Parts related with option 2 – MODEM オプション関連部品2 – モデム MODEM モデム Supply by customer 客先支給 ...
Page 68
Parts related with option 2 – MODEM オプション関連部品2 – モデム QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME LXE10E- 部品名称 符号 部品番号 図面番号 形式 仕様 備考 A32A A32B 0954640 Noise filter 2PA51273-1 ZCB2206-11 ノイズフィルタ 1780291 Protection plate 4P176030-1 保護板(YORK製モデム)...
Page 69
Parts related with option 3 – Others オプション関連部品3 – その他 1.Indoor fan guard 1.庫内ファンガード 2.Evaporator coil 2.蒸発器コイル組立品...
Page 70
Parts related with option 3 – Others オプション関連部品3 – その他 QTY/UNIT PARTS NO. DWG. NO. TYPE SPECIFICATION REMARKS INDEX PARTS NAME LXE10E- 部品名称 符号 部品番号 図面番号 形式 仕様 備考 A32A A32B 1686212 Inside fan cover 庫内ファンカバー(裏板SUS t0.8仕様) 2P165209-2 1683927 Evaporator ass'y...
Page 71
List of size for standard pipe clamp 配管固定具サイズ表 1.Resin clamp 1.樹脂バンド (外穴) (OUTER HOLE) (内穴)(外穴) (INNER HOLE)(OUTER HOLE) (INTERMEDIATE HOLE) (内穴)(中穴)(外穴) (INNER HOLE) (OUTER HOLE) SIZE サイズ PARTS NO. DWG NO. PARTS NAME 部品名称 LXE10E- 符号 部品番号 図面番号 A32A A32B E10 1222764 Resin clamp 樹脂バンド...
Page 72
List of size for standard pipe clamp 配管固定具サイズ表 2.Tube clamp 2.管止金 2-φ5.5穴 QTY/UNIT サイズ PARTS NO. DWG NO. SIZE PARTS NAME 部品名称 LXE10E- 符号 部品番号 図面番号 A32A A32B 1592425 Tube clamp 管止め金 NE31016-58 E15 0782775 Tube clamp 管止め金 NE31016-51 E16 1584215 Nylon coating tube clamp ナイロンコーティング管止め金 4P143802-51 E17 1584208 Nylon coating tube clamp ナイロンコーティング管止め金...
Page 73
Notes for ordering spare parts 部品発注の際の注意事項 1.Parts recommended to be ordered together with packing, gasket, sealing material and name plate 1.発注の際にパッキングやシール材、銘板等の同時発注を推奨する 部品 For ordering following spare parts, we recommend that you order the following packing, gasket, sealing material and name plate together at the same time. 上記のサービス扉やボックスカバーを発注の際には、下記のパッキングを同時に発注 することをおすすめします。 (1)Service door (1)サービス扉 QTY/UNIT PARTS NO. DWG NO. PARTS NAME 部品名称 LXE10E- 符号 部品番号 図面番号 A32A A32B A4 1612576 Access panel (FRP) サービス扉組立品 1P006678-5 Cushion material クッション材...
Page 74
Notes for ordering spare parts 部品発注の際の注意事項 (4)Ventilation cover (4)換気口蓋 QTY/UNIT PARTS NO. DWG NO. PARTS NAME 部品名称 LXE10E- 符号 部品番号 図面番号 A32A A32B A19 1847365 Ventilation cover 換気口蓋 3P134985-1 Sealing material A20 1266221 シール材 (換気口) 4P016185-1 (access panel) (5)Front plate (CA) (5)前板(CA)...
Page 75
Notes for ordering spare parts 部品発注の際の注意事項 2.Order for motorized valve, solenoid valve and pressure regulating valve 2.電動弁・電磁弁・圧力調整弁の発注 Refer to the following table for the name, main body, solenoid coil and ass'y of solenoid valves etc. applied to this model. この機種に使用されている電磁弁等の名称と本体・ コイル・組立品は下記のとおりです。 Common Parts QTY/UNIT 共通部品 Body/Coil PARTS NO. DWG NO. PARTS NAME 部品名称 LXE10E- 本体/コイル 符号 部品番号 図面番号 A32A A32B 本体 Body B7-3 125649J Electronic expansion valve body 電子膨張弁本体...
Page 76
Notes for ordering spare parts 部品発注の際の注意事項 3.Order for pressure trasducer 3.圧力センサーの発注 Refer to the following table for the pressure transducer applied to this model. For ordering pressure transducer, we recommend that you order the following best shrinkable tube together at the same time. この機種に使用している圧力センサーは下記の通りです。 圧力センサー発注の際は、下記の熱収縮チューブを同時に発注することをおすすめし ます。 QTY/UNIT PARTS NO. DWG NO. TYPE REMARKS PARTS NAME 部品名称 LXE10E- 符号 部品番号 図面番号 形式 備考 A32A A32B B16 1587959 High pressure transducer (HPT) 高圧圧力センサ (HPT) 3P141602-1 NSK-BD030F-070 B15 1587942 Low pressure transducer (LPT) 低圧圧力センサ...
Page 77
Notes for ordering spare parts 部品発注の際の注意事項 4.Order for temperature sensor 4.温度センサーの発注 Refer to the following table for temperature sensors applied to this model. この機種に使用されている温度センサーは下記の通りです。 Lot marks Type No. 表示 型番表示 Lot marks Type No. LOT 表示 型番表示 5Y01 ST9503-1- 1210 ST9701- Length Length ※Operating temp. range ー30〜+150℃ ※Operating temp. range ー30〜+70℃ 使用温度範囲 ー30〜+150℃ 使用温度範囲 ー30〜+70℃ Lot marks Type No. LOT 表示 型番表示 7828 ST9703-1 Length ※Operating temp. range ー30〜+15℃...
Page 78
Measuring and adjusting tools 測定調整用工具 1.Tools for emergency operation 1.緊急運転用工具 PARTS NO. DWG NO. ILLUSTLATION PARTS NAME 部品名称 用途 姿図 符号 部品番号 図面番号 For electronic expansion Emergency coil エマージェンシー 1080263 3P017370-1 コイルキャップ valve 電子膨張弁用 Suction E m e r g e n c y modulating エマージェンシー...
Page 79
Measuring and adjusting tools 測定調整用工具 2.Personal computer cable (for DCCS) 2.パソコンケーブル(DCCS用) The following parts are connector cables required to exchange information between the refrigeration unit and personal computer. The table below describes parts required to apply to Model LXE-C, -D, and -E new model. 下記の部品は冷凍ユニットとパソコンの情報交換に必要なコネクター、ケーブル類で す。LXE-C型、 D型、及び新機種E型対応に必要な部品を掲載しています。 [TYPE A]タイプA LXE10C LXE10C LXE10CA LXE10CA 1.5m LXE10D for MOL MOL用LXE10D (Receptacle) (レセプタクル) RS232C (Female) RS232C(メス) on the controller コントローラー側 [TYPE B]タイプB 0.3m 1.5m LXE10D LXE10D...
Page 80
Measuring and adjusting tools 測定調整用工具 Illustlation Internal Wiring 符号 姿図 内部配線 RS232C RS232C Female Female メス メス Frame Frame フレーム フレーム Daikin RS232C made Female ダイキン製 メス White Black Daikin RS232C made Female ダイキン製 メス Red 赤 White 白 Black 黒 Frame フレーム ...