Daikin LXE10E-A14 Service Manual page 66

https://daikin-p.ru
12. OPTIONAL CONDITION SETTING MODE
Key operation to enter/exit
<
Power OFF
Circuit Breaker ON
Unit OFF
I/O ON
All indication
lights on
(for 3 sec.)
for 3 sec.
F. PTI
Starting
S. PTI
preparation
M. CHECK
(for 18 sec.)
※ 1
Current
indication
(Operation state)
<Key operation in this mode>
Whenever the key is pressed, the indication changes.
S
Turn the power breaker OFF after the setting.
CHARTLESS CODE
INDICATION
SETTING
S
USDA SENSOR
1/2 SELECTION
SETTING
S
S
H001
S
>
( I/O
I/O OFF
for 3 sec.
※ 10
Optional
Function
Setting
To set the chartless code (D code /H code):
Select "ON" (indication of D/H code) or "OFF" (no indication of D/H code) on
the LED when the LCD displays "CHARTLS".
Whenever the or
changed.
Press the key to determine the setting.
To set the USDA sensor selection:
Select "1" or "2" on the LED when the LCD displays "USdA1/2".
Whenever the or
Press the key to determine the setting.
(see mode detail→5-9)
H001 code is displayed when the control temperature does not lower by 3 ˚C
or more for every 4 hours in pull-down operation.
Select "1" ˚C ,"2" ˚C ,"3" ˚C ,"4" ˚C ,"5" ˚C or "10" ˚C on the LED when the LCD
displays "H001".
Whenever the or
"1"˚C to "10" ˚C changes. Press the
Refer to page 3-66.
3-32
Circuit Breaker OFF
after setting change
OFF when no setting changed)
for 3 sec.
※ 11
Basic Function
Setting
key is pressed, the indication of "ON" or "OFF" is
key is pressed, the indication of "1" or "2" is changed.
key is pressed, the indication of the selection from
key to determine the setting.
for 3 sec.
※ 12
Optional
Condition
Setting