Table of Contents
Advertisement
Chapter 45 File Manager
Figure 462 Firmware Upload In Process
The ZyWALL automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 463 Network Temporarily Disconnected
After five minutes, log in again and check your new firmware version in the HOME screen.
If the upload was not successful, the following message appears in the status bar at the bottom
of the screen.
Figure 464 Firmware Upload Error
45.4 Shell Script Screen
Use shell script files to have the ZyWALL use commands that you specify. Use a text editor to
create the shell script files. They must use a ".zysh" filename extension.
Click Maintenance > File Manager > Shell Script to open the Shell Script screen. Use the
Shell Script screen to store, name, download, upload and run shell script files. You can store
multiple shell script files on the ZyWALL at the same time.
You should include
command, the changes will be lost when the ZyWALL restarts. You
write
could multiple
622
commands in your scripts. If you do not use the
write
commands in a long script.
write
ZyWALL USG 1000 User's Guide
Advertisement
Table of Contents
Troubleshooting
