Table of Contents
Advertisement
C
H A P T E R
This chapter shows you how to set up secure SSL VPN access for remote user login. See
Section 5.4.5 on page 116
21.1 SSL Access Policy
An SSL access policy allows the ZyWALL to perform the following tasks:
• limit user access to specific applications or files on the network.
• allow user access to specific networks.
• assign private IP addresses and provide DNS/WINS server information to remote users to
access internal networks.
21.1.1 SSL Access Policy Objects
Your ZyWALL uses the object-based configuration approach in which related settings are
grouped into an object. Once you have set up an object, you can apply and reuse it in other
configuration screens. Thus, the object-based approach minimizes repetitive configuration
steps and helps to reduce management and configuration efforts.
Objects store information and are referenced in the SSL Access Privilege screen. If you
update this information, in response to changes, the ZyWALL automatically propagates the
changes through the SSL policies that use the object(s). When you delete an SSL policy, the
objects are not removed.
The following table gives an overview of the settings you can configure in the corresponding
Object screens or through the SSL Access Privilege screen.
Table 100 Objects
OBJECT TYPE
User Accounts
Application
IP Pool
ZyWALL USG 1000 User's Guide
for related information on these screens.
OBJECT
DESCRIPTION
SCREEN
User Account/
Configure a user account or user group to which you want to apply
User Group
this SSL access policy.
SSL
Configure an SSL application object to specify the application type
Application
and server users are allowed to access.
Address
Configure an address object that defines a range of private IP
addresses to assign to user computers so they can access the
internal network through a VPN connection.
21
SSL VPN
323
Advertisement
Table of Contents
Troubleshooting
