ZyXEL Communications Unified Security Gateway ZyWALL 1000 User Manual page 591

Table 206 System > WWW (continued)
LABEL
Admin/User
Service Control
#
Zone
Address
Action
Add icon
HTTP
Enable
Server Port
Admin/User
Service Control
#
Zone
Address
Action
Add icon
Authentication
ZyWALL USG 1000 User's Guide
DESCRIPTION
Admin Service Control specifies from which zones an administrator can use
HTTPS to manage the ZyWALL (using the web configurator). You can also specify
the IP addresses from which the administrators can manage the ZyWALL.
User Service Control specifies from which zones a user can use HTTPS to log into
the ZyWALL (to log into SSL VPN for example). You can also specify the IP
addresses from which the users can access the ZyWALL.
This is the index number of the service control rule.
This is the zone on the ZyWALL the user is allowed or denied to access.
This is the object name of the IP address(es) with which the computer is allowed or
denied to access.
This displays whether the computer with the IP address specified above can access
the ZyWALL zone(s) configured in the Zone field (Accept) or not (Deny).
Click the Add icon in the heading row to open a screen where you can add a new
rule. Refer to Table 207 on page 592
Click the Edit icon to go to the screen where you can edit the rule.
Click the Add icon in an entry to add a rule below the current entry.
Click the Delete icon to remove an existing rule. A window display asking you to
confirm that you want to delete the rule. Note that subsequent rules move up by one
when you take this action.
Click the Move to N icon to display a field to type a number for where you want to
put that rule and press [ENTER] to move the rule to the number that you typed.
Select the check box to allow or disallow the computer with the IP address that
matches the IP address(es) in the Service Control table to access the ZyWALL
web configurator using HTTP connections.
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service to access the ZyWALL.
Admin Service Control specifies from which zones an administrator can use HTTP
to manage the ZyWALL (using the web configurator). You can also specify the IP
addresses from which the administrators can manage the ZyWALL.
User Service Control specifies from which zones a user can use HTTP to log into
the ZyWALL (to log into SSL VPN for example). You can also specify the IP
addresses from which the users can access the ZyWALL.
This is the index number of the service control rule.
This is the zone on the ZyWALL the user is allowed or denied to access.
This is the object name of the IP address(es) with which the computer is allowed or
denied to access.
This displays whether the computer with the IP address specified above can access
the ZyWALL zone(s) configured in the Zone field (Accept) or not (Deny).
Click the Add icon in the heading row to open a screen where you can add a new
rule. Refer to Table 207 on page 592
Click the Edit icon to go to the screen where you can edit the rule.
Click the Add icon in an entry to add a rule below the current entry.
Click the Delete icon to remove an existing rule. A window display asking you to
confirm that you want to delete the rule. Note that subsequent rules move up by one
when you take this action.
Click the Move to N icon to display a field to type a number for where you want to
put that rule and press [ENTER] to move the rule to the number that you typed.
Chapter 44 Service Control
for information on the fields.
for information on the fields.
591