ZyXEL Communications Unified Security Gateway ZyWALL 1000 User Manual page 700

Appendix B Log Descriptions
Table 254 Interface Logs (continued)
LOG MESSAGE
%s MTU > (%s MTU - 8),
%s may not work
correctly.
(%s MTU - 8) < %s MTU,
%s may not work
correctly.
Interface %s links
down. Default route
will not apply until
interface %s links up.
name=%s,status=%s,TxP
kts=%u,
RxPkts=%u,Colli.=%u,T
xB/s=%u,
RxB/s=%u,UpTime=%s
name=%s,status=%s,TxP
kts=%u,
RxPkts=%u,Colli.=%u,T
xB/s=%u,
RxB/s=%u
Interface %s start
dailing.
Interface %s connect
failed: Connect to
server failed.
Interface %s
connection
terminated.
Interface %s
connection
terminated: idle
timeout.
Interface %s connect
failed: MS-CHAPv2
mutual authentication
failed.
Interface %s connect
failed: MS-CHAP
authentication
failed.
Interface %s connect
failed: CHAP
authentication
failed.
Interface %s is
connected.
700
DESCRIPTION
An administrator configured a PPP interface, PPP interface MTU >
(base interface MTU - 8), PPP interface may not run correctly because
PPP packets will be fragmented by base interface ans peer will not
receive correct PPP packets. 1st %s: PPP interface name, 2nd %s:
ethernet interface name.
An administrator configured ethernet, vlan or bridge and this interface
is base interface of PPP interface. PPP interface MTU > (base
interface MTU - 8), PPP interface may not run correctly because PPP
packets will be fragmented by base interface and peer will not receive
correct PPP packets.1st %s: Ethernet interface name, 2nd %s: PPP
interface name.
An administrator set a static gateway in interface but this interface is
link down. At this time the configuration will be saved but route will not
take effect until the link becomes up.1st %s: interface name, 2nd %s:
interface name.
Port statistics log. This log will be sent to the VRPT server.
1st %s: physical port name, 2nd %s: physical port status, 1st %u:
physical port Tx packets, 2nd %u: physical port Rx packets, 3rd %u:
physical port packets collisions, 4th %u: physical port Tx Bytes/s, 5th
%u: physical port Rx Bytes/s, 3rd %s: physical port up time.
Interface statistics log. This log will be sent to the VRPT server.
1st %s: interface name, 2nd %s: interface status, 1st %u variable:
interface Tx packets, 2nd %u variable: interface Rx packets, 3rd %u:
interface packets collisions, 4th %u: interface Tx Bytes/s, 5th %u:
interface Rx Bytes/s.
A PPP or aux interface started dialing to a server. %s: interface name.
A PPTP interface failed to connect to the PPTP server. %s: interface
name.
A PPP or AUX connection will terminate. %s: interface name.
An idle PPP or AUX connection timed out.1%s: interface name.
MS-CHAPv2 authentication failed (the server must support mS-
CHAPv2 and verify that the authentication failed, this does not include
cases where the servers does not support MS-CHAPv2). %s: interface
name.
MS-CHAP authentication failed (the server must support MS-CHAP
and verify that the authentication failed, this does not include cases
where the server does not support MS-CHAP). %s: interface name.
CHAP authentication failed (the server must support CHAP and verify
that the authentication failed, this does not include cases where the
server does not support CHAP). CHAP: interface name.
A PPP or AUX interface connected successfully. %s: interface name.
ZyWALL USG 1000 User's Guide