Table of Contents
Advertisement
Figure 211 VPN > IPSec VPN > SA Monitor
Each field is described in the following table.
Table 99 VPN > IPSec VPN > SA Monitor
LABEL
Name
Policy
Search
Total Connection
connection per
page
Page x of x
#
Name
Encapsulation
Policy
Algorithm
Up Time
Timeout
Inbound (Bytes)
Outbound (Bytes)
Disconnect
Refresh
ZyWALL USG 1000 User's Guide
DESCRIPTION
Enter the name of a IPSec SA here and click Search to find it (if it is associated).
You can use a keyword or regular expression. Use up to 30 alphanumeric and
_+-.()!$*^:?|{}[]<>/ characters. See
Enter the IP address(es) or names of the local and remote policies for an IPSec
SA and click Search to find it. You can use a keyword or regular expression. Use
up to 30 alphanumeric and _+-.()!$*^:?|{}[]<>/ characters. See
page 322
for more details.
Click this button to search for an IPSec SA that matches the information you
specified above.
This field displays the total number of associated IPSec SAs.
Select how many entries you want to display on each page.
This is the number of the page of entries currently displayed and the total number
of pages of entries. Type a page number to go to or use the arrows to navigate
the pages of entries.
This field is a sequential value, and it is not associated with a specific SA.
This field displays the name of the IPSec SA.
This field displays how the IPSec SA is encapsulated.
This field displays the content of the local and remote policies for this IPSec SA.
The IP addresses, not the address objects, are displayed.
This field displays the encryption and authentication algorithms used in the SA.
This field displays how many seconds the IPSec SA has been active. This field
displays N/A if the IPSec SA uses manual keys.
This field displays how many seconds remain in the SA life time, before the
ZyWALL automatically disconnects the IPSec SA. This field displays N/A if the
IPSec SA uses manual keys.
This field displays the amount of traffic that has gone through the IPSec SA from
the remote IPSec router to the ZyWALL since the IPSec SA was established.
This field displays the amount of traffic that has gone through the IPSec SA from
the ZyWALL to the remote IPSec router since the IPSec SA was established.
This field is displayed if the IPSec SA does not use manual keys.
Click the Disconnect icon next to an IPSec SA to disconnect it.
Click Refresh to update the information in the display.
Chapter 20 IPSec VPN
Section 20.6.1 on page 322
for more details.
Section 20.6.1 on
321
Advertisement
Table of Contents
Troubleshooting
