Current Users; Figure 110 Status > Port Statistics; Table 37 Status > Port Statistics - ZyXEL Communications Unified Security Gateway ZyWALL 1000 User Manual

Figure 110 Status > Port Statistics
The following table describes the labels in this screen.
Table 37 Status > Port Statistics
LABEL
Port
status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
System Up Time
Poll Interval
Set Interval
Stop

7.5 Current Users

Use this screen to look at a list of the users currently logged into the ZyWALL. To access this
screen, click the Number of Login Users Detail icon in the Status screen.
ZyWALL USG 1000 User's Guide
DESCRIPTION
This field displays the physical port number.
This field displays the current status of the physical port.
Down - The physical port is not connected.
Speed / Duplex - The physical port is connected. This field displays the port speed
and duplex setting (Full or Half).
This field displays the number of packets transmitted from the ZyWALL on the
physical port since it was last connected.
This field displays the number of packets received by the ZyWALL on the physical
port since it was last connected.
This field displays the number of collisions on the physical port since it was last
connected.
This field displays the transmission speed, in bytes per second, on the physical port
in the one-second interval before the screen updated.
This field displays the reception speed, in bytes per second, on the physical port in
the one-second interval before the screen updated.
This field displays how long the physical port has been connected.
This field displays how long the ZyWALL has been running since it last restarted or
was turned on.
Enter how often you want this window to be updated automatically, and click Set
Interval.
Click this to set the Poll Interval the screen uses.
Click this to stop the window from updating automatically. You can start it again by
setting the Poll Interval and clicking Set Interval.
Chapter 7 Status
163