Set Up User Accounts; Set Up User Groups; Figure 74 User/Group > User > Add; Figure 75 User/Group > Group > Add - ZyXEL Communications Unified Security Gateway ZyWALL 1000 User Manual

6.4.1 Set up User Accounts

Set up one user account for each user account in the RADIUS server. If it is possible to export
user names from the RADIUS server to a text file, then you might create a script to create the
user accounts instead. This example uses the web configurator.
1 Click User/Group > User. Click the Add icon.
2 Enter the same user name that is used in the RADIUS server, and set the User Type to
Ext-User because this user account is authenticated by an external server. Click OK.
Figure 74 User/Group > User > Add
3 Repeat this process to set up the remaining user accounts.

6.4.2 Set up User Groups

Set up the user groups and assign the users to each one.
1 Click User/Group > Group. Click the Add icon.
2 Enter the name of the group that is used in
"Finance". Then, select User/Leo and click the right arrow to move him to the Member
list. This example only has one member in this group, so click OK. Of course you could
add more members later.
Figure 75 User/Group > Group > Add
3 Repeat this process to set up the remaining user groups.
ZyWALL USG 1000 User's Guide
Table 33 on page 140. In this example, it is
Chapter 6 Tutorials
141