Table 116 Apppatrol > Other - ZyXEL Communications Unified Security Gateway ZyWALL 1000 User Manual

Chapter 27 Application Patrol
The following table describes the labels in this screen. See
more information as well.
Table 116 AppPatrol > Other
LABEL
Policy
#
Port
Schedule
User
From
To
Source
Destination
Protocol
Access
BWM
Log
396
DESCRIPTION
This table lists the policies configured for traffic which does not match an
application.
This field is a sequential value, and it is not associated with a specific condition.
Note: The ZyWALL checks conditions in the order they appear in
the list. While this sequence does not affect the functionality,
you might improve the performance of the ZyWALL by putting
more common conditions at the top of the list.
This field displays the specific port number to which this policy applies.
This is the schedule that defines when the policy applies. any means the policy
always applies.
This is the user name or user group to which the policy applies. If any displays, the
policy applies to all users.
This is the source zone of the traffic to which this policy applies.
This is the destination zone of the traffic to which this policy applies.
This is the source address or address group for whom this policy applies. If any
displays, the policy is effective for every source.
This is the destination address or address group for whom this policy applies. If any
displays, the policy is effective for every destination.
This is the protocol of the traffic to which this policy applies.
This field displays what the ZyWALL does with packets that match this policy.
forward - the ZyWALL routes the packets.
Drop - the ZyWALL does not route the packets and does not notify the client of its
decision.
Reject - the ZyWALL does not route the packets and notifies the client of its
decision.
These fields show the amount of bandwidth the traffic can use. These fields only
apply when Access is set to forward.
In - This is how much inbound bandwidth, in kilobits per second, this policy allows
the matching traffic to use. Inbound refers to the traffic the ZyWALL sends to a
connection's initiator. If no displays here, this policy does not apply bandwidth
management for the inbound traffic.
Out - This is how much outgoing bandwidth, in kilobits per second, this policy
allows the matching traffic to use. Outbound refers to the traffic the ZyWALL sends
out from a connection's initiator. If no displays here, this policy does not apply
bandwidth management for the outbound traffic.
Pri - This is the priority for the traffic that matches this policy. The smaller the
number, the higher the priority. Traffic with a higher priority is given bandwidth
before traffic with a lower priority. The ZyWALL ignores this number if the incoming
and outgoing limits are both set to 0. In this case the traffic is automatically treated
as being set to the lowest priority (7) regardless of this field's configuration.
Select whether to have the ZyWALL generate a log (log), log and alert (log alert)
or neither (no) when traffic matches this policy. See
more on logs.
Section 27.10.1 on page 397
Chapter 46 on page 625
ZyWALL USG 1000 User's Guide
for
for