Vpn Status - ZyXEL Communications Unified Security Gateway ZyWALL 1000 User Manual

Chapter 7 Status
Table 34 Status (continued)
LABEL
HA Status
Zone
IP Address
Renew/Dial
Top 5 Intrusion &
Virus Detection
Rank
Intrusion
Detected
Virus Detected
Refresh Interval
Refresh Now

7.2 VPN Status

Use this screen to look at the VPN tunnels that are currently established. To access this screen,
click VPN Status in the Status screen.
160
DESCRIPTION
This field displays the status of the interface in the virtual router.
Active - This interface is the master interface in the virtual router.
Stand-By - This interface is a backup interface in the virtual router.
Fault - This VRRP group is not functioning in the virtual router right now. For
example, this might happen if the interface is down.
n/a - Device HA is not active on the interface.
This field displays the zone to which the interface is currently assigned.
This field displays the current IP address assigned to the interface. If the IP
address is 0.0.0.0, the interface is disabled or did not receive an IP address and
subnet mask via DHCP.
If this interface is a member of an active virtual router, this field displays the IP
address it is currently using. This is either the static IP address of the interface (if it
is the master) or the management IP address (if it is a backup).
Use this field to get or to update the IP address for the interface. Click Renew to
send a new DHCP request to a DHCP server. Click the Connect icon to try to
connect the auxiliary interface or a PPPoE/PPTP interface. If the interface cannot
use one of these ways to get or to update its IP address, this field displays n/a.
The following is a list of the five intrusions or viruses that the ZyWALL has most
frequently detected since it last started up.
This is the ranking number of an intrusion or virus. This is an intrusion's or virus's
place in the list of most common intrusions or viruses.
This is the name of a signature for which the ZyWALL has detected matching
packets. The number in brackets indicates how many times the signature has been
matched.
Click the hyperlink for more detailed information on the intrusion.
This is the name of the virus that the ZyWALL has detected.
Select how often you want the screen to automatically refresh.
Click this to update the screen immediately.
ZyWALL USG 1000 User's Guide